Hydraulic Digital Pressure Gauge is electronic-structure and battery-powered, which make it very easy for on-site installation. Specifically, a high-precision piezo-resistive pressure sensor is used and the output signal is processed by the high-precision, low temperature drifting amplifier, then sent into the high-precision A/D converter to be converted into digital signal, after being computed and processed, the actual pressure value is showed on the LCD screen.
◆ Large-screen LCD display, back light,high resolution,easy to read
◆ Automatically record the maximum pressure values during the measurement
◆ Pressure on the percentage of dynamic display, (the progress bar display)
◆ Five engineering units: psi, bar, kPa, MPa, kg / cm2
◆ 0 ~ 15min auto-off feature.
◆ Micro-power consumption, work over 2 years in power-saving mode, 2,000 hours continuous work.
◆ Parameter correction, correct zero and error in field application.
◆ Pressure range already set before use
◆ Hydraulic Digital Pressure Gauge Sampling rate: 4 times / sec
◆ Applicable to gases and liquids compatible with stainless steel
1) Stored and used in an environmental temperature of -10℃~ 60℃,the relative humidity less than 80%.
2) Should be concentric and parallel when connect digital pressure gauge and pressure system.
3) Please use 9V alkaline battery(6LR61) when replace the battery.
4) When installing the gauge,please use right way
|SPECIFICATIONS FOR MRC-PG100 PRESSURE GAUGE|
|PROTECTION LEVEL/IP RATING||IP65|