Specifications
measuring media | gases and liquids compatible with 304 316LSS | ||
pressure range | Bar | Gauge:-1...0~0.1...1000Bar | |
Bar | Absolute:35kpa...25Bar | ||
overload pressure | %FS | 150 | |
burst pressure | %FS | 200 | |
power supply | Vdc | 12-32 | |
output signal | 4-20mA,0.5-4.5VDC,0-10VDC,RS485 | ||
zero offset | %FSO | 1 maximum | |
accuracy | %FSO | ±0.25 | |
long-term stability | %FSO/year | 0.15 | |
Load resistance | Ω | 250~1150Ω (for 4~20 mA current loop) | |
storage temperature range | oC | -40~+120 | |
operating temperature range | oC | -30~+80 | |
compensated temperature range | oC | -30~+80 | |
temperature coefficient of ZERO | %FSO/ | ±0.02 | |
temperature coefficient of SPAN | %FSO/ | ±0.04 | |
process connection | thread | G1/2”,M20X1.5 or others | |
electrical connection | DIN 43650 Hirschmann connector | ||
environment protection | IP rating | IP 65 | |
pressure membrane material | Silicon | ||
material of wetted parts | 316L SS | ||
housing material | 304 SS |
When ordering,pls specify pressure range,accuracy,thread size and your quantity etc.
The pressure diaphragm of this transmitter is made from silicon material, while its wetted parts are made from 316L stainless steel which possesses a higher degree of resistance against chemical corrosion.