Submersible Pressure Sensors, equipped with the diffused silicon sensor , the temperature compensation of the computer laser, and the integrated wiring box. It also owns special terminal and digital display, installation, calibration, maintenance convenience.
This series of products are widely used in oil, water conservancy, chemical, metallurgy, electric power, light industry, scientific research, environmental protection and other enterprises and institutions, to achieve the measurement of liquid level height and suitable for all kinds of weather conditions and all kinds of corrosive fluid.
1.Submersible Pressure Sensors can be Optional span
2.Digital display of liquid level
3.Zero and span adjustment easily
4.Small volume, nice appearance, high cost-effective
5.High accuracy, high stability, high reliability
SPECIFICATIONS FOR MRC-LT100 SUNMERSIBLE PRESSURE SENSOR
PROTECTION LEVEL/IP RATING
1.The setting supports Range Zoom without pressure sources. IU-L represents 4mA, IU-H represents 20mA.
2. Amplification Factor: Changing Amplification Factor could change the value shows on the screen. After setting this value, the number shows= Amplification Factor*/Actual measuring value
3. Null point Span
Supporting null point span without pressure sources. After setting this value, the number shows= Amplification Factor*/Actual measuring value+null point span value
4. Filter factor
To prevent display value change from pressure fluctuation. Optional value:0-5. The higher this value is, the more stable and hystereticthe display value is. (Filter factor would not influence current output)
1. Please connect wire according to the drawing,there will be no signal if wrong connecting. Transmitter can work after connecting power, but it is better to
preheat it for 30mins to get the stale signal.
2. This transmitter is suitable for medium which is non-corrosive to stainless steel and silicon.(Except the anti corrosive model)
3. The maximum pressure of the measured system shall not exceed the rated overload value. The transmitter's back pressure side shall not be directly connected to conductive or corrosive liquid or gas. The vents of the sealed level air-guide cable should not be blocked.
4. It is strictly forbidden to push sharp and hard things into the pressure output hole, and the flush diaphragm type transmitter can't collide with anything like hands.
5. This product is precise measuring instrument. It is strictly forbidden to break, strongly clamp, disassemble or poke the pressure hole with sharp metal instruments
6. Non-professionals should not disassemble the instrument circuit board or change other devices.
Shipping and package
1.Submersible Pressure Sensors if the quantity of order is not very big, we could deliver them to you by express, such as TNT,DHL,UPS,FEDEX or EMS.
2.If order is big , we will advise you use Air shipping or Sea shipping through your nominated forwarder agent,our long-term cooperated agent is also available.
3.Freight collect if bulk shipment.
1. Can I get sample?
Pls contact with us online directly and then we can discuss case by case.
2. Can I visit your factory?
Sure, you are always welcome, we are ORIGINAL MANUFACTURER.
Our factory is located at Baoji city, Shaanxi province, China.
3. Can we use our logo on the products?
Yes, we can offer the OEM/ODM service.