Differential Level Transmitter are widely used to measure tank level. The accuracy is 0.075%, so it is also be used to measure gasoline, diesel. It could equipped with single flange or double flange.
1.Span shift function, span shift ratio 10:1
2.Damping: 0-30s adjustment, 0.1s/step
3.Zero/full span compensation and correction
4.Output current multi points correction
5.Multi pressure units option
6.Ultralow temperature LCD display (-40~70℃)
7.Extraction of a root function for output current
8.Self-diagnosis and fault alarm output function
9.EEPROM non-volatile memory, prevent losing data due to outage or mistake
10.Differential Level Transmitter remote transmission via HART
Specifications of MRC-TT400 Pressure Transmitter | |||
Sensor Material | Monocrystalline silicon | ||
Measure Medium | Gas/Liquid/Steam | ||
Output | 4~20mA+Hart | ||
Power Supply | 12~30VDC | ||
Display | 5-digits LCD 3 wires | ||
Accuracy | 0.075% F.S. | ||
Stability | ≤0.1%/year, 0.25%/3 years | ||
Operating Temperature | -40℃~70℃ | ||
Explosion-proof Performance | Explosion-proof, waterproof, sealed shell, Intrinsically-safe | ||
Damping Adjustment | 0-30s, 0.1s/step | ||
Medium Temperature | -40℃~100℃(silicon oil) -40℃~85℃(fluorocarbon oil) -29℃~149℃(normal silicon oil) 15℃~300℃(high temp. silicon oil) | ||
Damping Adjustment | 0-30s, 0.1s/step | ||
Measure Range | Differential pressure: 0-0.125KPa to 0-7MPa Gauge pressure: 0-0.125KPa to 0-42MPa Absolute pressure: 0-200KPa to 0-2.1MPa | ||
Measure Range Ratio | 10:1 |
Installation
Differential Pressure Transmitter Installation,in order to install it smoothly, please refer to the following points:
a. The pipe should be as shorter as possible without buckling.
b. The installation pipe gradient should be no less than 1:12.
c. Please clear the pipe with compressed air or testing medium before installation.
d. The pipe should be empty before installation if the medium is liquid.
e. The pipe structure should be designed to make sure that the bubble in testing liquid or precipitate in testing gas can return back the procedure pipe.
f. There must be no leakage while installing the procedure pipe.
Packaging
FAQ
1. Can I get sample?
Contact with our staff online directly and they would check stock for you.
2. Can I visit your factory?
You are warmly welcomed, our factory is located at Baoji city, Shaanxi province, China.
3. Can we use our logo on the products?
Yes, we provide OEM/ODM service.
4. How long is your warranty period?
Warranty period from the date of acceptance of 12 months.