Thermo Flow Switch
Overview
This thermo flow switch which could do real-time monitoring of liquid in the pipeline and it shall show the flow condition by several LED displayers. It can monitors following conditions:
Flow speed increasing or reducing, medium exists or not, the medium is moving or not.
It is used to protect idling pump and monitor the flow rate in the pipeline.
Main features
All stainless-steel case without movable components
Maintenance-free
Switching point could be set on site
LED displayer shows flow state and on-off state
SPECIFICATIONS OF Thermo Flow Switch | |||
Pressure Range | 1~150cm/s(water) 3~300cm/s(oil) | Consumed current | <90mA DC |
Switch type | electric appliance /PNP/NPN | Response time | 2s |
Power supply | 24V±20%VDC | Operating temperature | -30-80℃ |
Protection grade | IP67 | Dielectric strength level | 10MPa |
Medium temperature | -20-80℃ | Housing material | Stainless steel |
SELECTION GUIDE OF Thermo Flow Switch | ||
Switch type | J | Electric relay |
P | PNP | |
N | NPN | |
Inserting depth
| L1 | 15mm |
L2 | 18mm | |
L3 | 40mm | |
L4 | 60mm |